Get Cutonce
Menu

Firewood Rack

An open rack of eleven pieces that holds a stack of logs off the ground between two pairs of uprights.

  • Easy. Suits a first build.
  • About 3 hours. 9 steps, each with its own drawing.
  • 1092 × 355 × 914 mm (43 × 14 × 36 in). Width, depth and height when finished, in pine.
Build it with Cutonce See what comes with it

$39.99 for your first 3 months ($0.44 a day), then $99.98 every 3 months. Cancel any time.

The pine firewood rack against a brick wall, filled with a stack of split logs between its two pairs of uprights
Plan
CO-007
Time
3 h
Parts
11

What comes with this plan

Everything you need to build CO-007, in the Cutonce app. The lists, the drawings and every step come from one model of the piece, so their numbers agree.

  • Cutting list

    11 pieces in 4 part types, each with its size, to tick off once cut.

  • Shopping list

    The boards and fixings to buy, and the parts each board gives you.

  • 9 steps

    A drawing for every step. On a cutting step the length to cut is the largest thing on screen.

  • Drawings

    The exploded view with every part numbered, and dimensioned plans of the finished piece.

  • Watch the build

    Each new part glides into place on the drawing before you fit it.

  • PDF

    The whole plan as a PDF, to print or keep.

Firewood Rack, exploded view with numbered partsExploded view, parts numbered by type: 1 Runner, 2 Upright, 3 Cross piece, 4 Top tie.11233344
View
Exploded
Part types
4
Exploded view. Each part type keeps its number in the cutting list, the drawings and the steps.
Firewood Rack, assembledThe finished piece seen from the front and one side. Overall size 109 × 36 × 91 cm.
View
Assembled
Steps
9
Assembled, in pine. 9 steps take you from boards to this.

Made from pine, 1092 × 355 × 914 mm overall (43 × 14 × 36 in).

  • The firewood rack on a covered porch, seen from one end, half filled with birch logs, with a log basket beside it
    Plan
    CO-007
    Photo
    1 of 3
  • The empty firewood rack on paving slabs in front of a fence, showing the base frame, the four uprights and the two top ties
    Plan
    CO-007
    Photo
    2 of 3
  • The pine firewood rack against a brick wall, filled with a stack of split logs between its two pairs of uprights
    Plan
    CO-007
    Photo
    3 of 3

Tools you need

Hand tools and a drill, and the kit to wear while you cut.

Tools

  • Tape measure
  • Pencil
  • Try square
  • Hand saw
  • Drill
  • Drill bits
  • Clamps
  • Sanding block
  • Brush

Safety kit

  • Safety glasses
  • Dust mask

One subscription, every plan

Your Cutonce subscription opens CO-007 and every other plan in the app. Here are the other 12 ready-made plans to start with.

Browse the plans

Start your firewood rack today.

$39.99 for your first 3 months ($0.44 a day), then $99.98 every 3 months. Cancel any time.

Get Cutonce

Firewood Rack, assembled (line drawing)The finished piece seen from the front and one side. Overall size 109 × 36 × 91 cm.
Plan
CO-007
Time
3 h